Top 10 Best Air Compressors for Framing Crew

The best air compressor for framing crew guarantees efficiency through its systemic release of pneumatic power to the framing tools.

When you are out on-site doing some heavy framing work, only the right air compressors can help you get your job done faster and better.

However, these compressors differ by a lot of factors and you must pick a specific one that suits your needs.

Each air compressor is quite unique in terms of power generation. The ease with which each air compressor works with a framing gun could also be an important consideration.

The air compressor works well with the nail guns when it comes to framing. Framers use the air compressors to good effect as their nail gun requires the device to function effectively.

A proper air compressor system makes it easy to fix nails on joints without the usual method of using a hammer.

Read more: Top 7 Best Air Compressors for HVLP.

Asides from the fact that the process becomes more seamless, it also improves the efficiency as more frames are created within a short while. This guide provides great insight into the selection of a good air compressor for framing.

Top Air Compressors for Framing Crew

[amazon box=”B00UHNM60C, B07KHHDJGD, B0001Q2VPU, B000HZJLV2, B00WM1VPKE, B0001Q2VPK, B0746SBGXS, B0000AQK78, B0035HYJN4, B01IE0UT9Y” price=”none” template=”table”]

Top 10 Best Air Compressor for Framing Crew Reviews:

Best Air Compressors for Framing Crew

1. Bostitch BTFP3KIT Air Compressor Combo Kit

[amazon fields=”B00UHNM60C” value=”thumb” image_size=”large” image_align=”center” image_alt=”Bostitch BTFP3KIT Air Compressor Combo Kit”]

The Bostitch Air Compressor Combo kit for framing crew is a great starter kit for rookies using air tools. The kit comprises a 6-gallon pancake Air compressor; this property makes it possible for the user to utilize other mechanical tools like staplers and nail guns.

This Bostitch compressor also has a maximum pounds per square of 150, and it’s packaged with three mechanical tools, each with unique dimensions.

It comprises a brad nailer capable of driving nails that are 18-gauged from ⅝ to approximately 2inches; it also comprises a finish nailer capable of driving a 16-gauge nail from 1.25 to 2.5 ultimately, a crown stapler capable of driving ⅜-inch staples from 0.25 to 9/16 inches.

Asides from this Bostitch air compressor’s time-saving ability, it also comes along with a 15-foot air hose and a set of simple fasteners. It takes this Bostitch air compressor approximately five minutes to fill up 140psi from zero. That’s impressive!


  • Efficient, portable, and well-designed compressor
  • Within five minutes, this Bostitch compressor can conveniently reach 150 PSI
  • The pump is oil-free and maintenance-free
  • Easy to start up/handle
  • The crown stapler it comes with is useful for several construction applications
  • Nailers are perfectly designed for smooth drills


  • This Bostitch air compressor weighs 29 pounds, more compact than portable
  • It’s not soundless, and it’s easily prone to leakage problems

2. Craftsman CMEC6150K 6 Gallon Air Compressor

[amazon fields=”B07KHHDJGD” value=”thumb” image_size=”large” image_align=”center” image_alt=”Craftsman CMEC6150K 6 Gallon Air Compressor”]

Craftsman 6 Gallon Air compressor for framing crew is a product of superb engineering work. It is an easy-to-use Air compressor with outstanding durability and efficiency characteristics.

This Air compressor is one of the few compressors you could use for farming nailers without causing yourself much trouble.

With this compressor, you’ve no problem handling flat tires of your bicycle or van/truck tires. Aside from the fact that you could use it to inflate different vehicle tires, it could also serve cleaning properties as you can use it to handle general house clean-up.

This compressor’s 6-gallon pancake design, which is its highlight, gives the compressor its portability feature, as you can move it around with ease in your workshop/house.

The pump connected to the compressor is entirely oil-free, so there will be no obstruction in airflow when the compressor is in use. You’ll also get an adequate cut-in pressure as the compressor has a PSI of 150.


  • The compressor engine has enough power to inflate all kinds of vehicle tires
  • With this compressor, you can easily outrun the 2.6SCFM
  • With a well-constructed handle design, the compressor is portable
  • It also has rubberized feet, which makes transportation easy
  • Generally, the compressor has a good build quality, and it’s compact
  • An oil-free pinup is used in this compressor’s construction


  • Craftsman 6 Gallon Air compressor can’t handle drilling jobs
  • It’s not advisable to use the compressor for Air Brushing as it could get damaged

3. Makita MAC5200 3.0 HP Big Bore Air Compressor for Framing Crew

[amazon fields=”B0001Q2VPU” value=”thumb” image_size=”large” image_align=”center” image_alt=”Makita MAC5200 3.0 HP Big Bore Air Compressor for Framing Crew”]

The Makita mac 5200 Big Bore 3.0 HP air compressors are an ideal match for household and workshop usage. Surprisingly, these compressors can also handle construction works and woodworking jobs.

The compressor for framing crew comes with an additional 90 PSI, which is triggered when CFM is increased. MAC5200 also pneumatic rubbers, which are 8-inch thick, moving very easily. The handle is foldable, making it compact and portable.

Makita Mac5200 also has a quality air pump performance. Asides from the surplus 90PSI, this compressor also boasts of a staggering 3 HP. Due to the unique properties that Makita Mac5200 possesses, it’s seen as a “big bore” air compressor.

The compressor could be used to handle several projects with ease, and a top-notch output is assured. This compressor is one of the few compressors with several tricks up their sleeves, hence it’s exclusive.


  • An additional 90 PSI increases its efficiency and productivity
  • The big bore cylinders maximize the output of the air pump
  • This compressor is highly recommended for workshop owners because of its versatility
  • Its overall build-up quality is top-notch
  • The 8-inch pneumatic tires enhance portability and coordinated movement
  • Heat levels are kept low in this compressor by its copper alloy finned tubes


  • This air compressor is extremely noisy—up to 90 decibels
  • The compressor requires frequent maintenance practices

4. DEWALT D55146 Air Compressor

[amazon fields=”B000HZJLV2″ value=”thumb” image_size=”large” image_align=”center” image_alt=”DEWALT D55146 Air Compressor”]

The Dewalt Air compressor 225-PSI for framing crew has a vertical stand feature that allows users to save enough space when the compressor isn’t in use by storing it in a vertical.

It has standard cubic feet per minute of 5.0SCFM, and 90 pounds per square inch, these features combined allow the compressor to recover quickly after exhaustion of the first charged tank.

Dewalt air compressor also has an operational noise level of 78dB, ensuring quietness during work actions. With its high flow coupler, the compressor has a higher nailer performance.

The compressor also has a metal console panel that serves as a form of protection to the compressor, covering up the couplers, gauges, and regulator.

The Dewalt Air Compressor gauge type is 2,” and this configuration permits an easy-to-read surface. The compressor also has a collapsible handle which enhances its portability feature.

Dewalt is manufactured in the United States, but it’s now worldwide because it meets many customers’ requirements.


  • The compressor comes with superior quality
  • The Dewalt Air Compressor 225- PS has the unique feature of coming in portable and non-portable designs
  • Home-based professionals are allowed to use this compressor freely
  • The compressor has great durability, and it’s very efficient
  • Compared to other brands, this compressor has the most CFMs
  • Reduced noise level while in operation


  • This compressor-type is quite pricey
  • Dewalt Air Compressor 225- PS is always faced with leakage issues

5. California Air Tools 8010 Steel Tank Air Compressor for Framing

[amazon fields=”B00WM1VPKE” value=”thumb” image_size=”large” image_align=”center” image_alt=”California Air Tools 8010 Steel Tank Air Compressor for Framing”]

This California Air tools 8010 Steel Tank is one quiet compressor as it produces just about 60 dB of sound. Equipped with a 1 HP motor that quietly operates at 1680 RPM, the lower power rate means the compressor produces minimal noise while simultaneously reducing wear and tear in its parts.

This air compressor for framing crew also comes with a dual-piston pump that’s oil-free; this improves its efficiency and durability.

Moving the compressor from one point to another is convenient as the compressor has a lightweight and sturdy steel tank.

This compressor is even more impressive when you consider the fact that it has a dual-piston pump system that makes it perform well in varying temperatures.

If you want a compressor that allows you to work without drawing attention, the California Air tools 8010 Steel Tank is ideal for you.


  • The compressor runs off 8.5 Amps; this makes it less pricey and easy to maintain
  • It is a light-weighted compressor, which means moving around with the compressor wouldn’t be energy-sapping
  • It’s a great option for users who like to work in a serene environment as it emits just 60 decibels
  • It is a corded-electric air compressor, which means it’s applicable anywhere
  • With a duty cycle of 70/30, this compressor can work for hours without breaking down
  • It functions at a wide range of temperatures


  • It has a little horsepower, and this can affect its work rate
  • The cable design it has could cause inconvenience during operation

6. Makita MAC2400 Big Bore Framing Crew Air Compressor

[amazon fields=”B0001Q2VPK” value=”thumb” image_size=”large” image_align=”center” image_alt=”Makita MAC2400 Big Bore Framing Crew Air Compressor”]

The Makita Mac2400 for framing crew is fully equipped with a big bore pump cylinder that aids efficient output. The Air compressor also has a piston which also aids the two nailers’ outputs.

Under tough job sites, this Air Compressor can still deliver industrial power and exhibit its durability property.

Makita’s Mac2400 also has a 2.5HP motor power supply, allowing it to carry out jobs for many hours non-stop. The pump mentioned earlier is adequately lubricated for improved sir outflow and prevention of wear and tear.

The Mac2400 adequately runs cooler, and with its RPM value at the half, it has a greater pump life and carries out operations at lower noise levels.

This Air compressor is just another product of Makita’s efficiency and commitment to best-in-class compressor engineering. The Air compressors also have large style filters, which help increase efficiency in air uptake.


  • The Air compressor draws less Amp, and that’s best for operation
  • Wear and corrosion are adequately controlled, which means the durability property is functional
  • Maintenance is not difficult and less frequent
  • Constructed with cast iron, this compressor’s durability is top-notch
  • The compressor could be used for woodwork and automotive purposes, which means it’s versatile
  • The 2.5HP increases the Air compressor’s work rate


  • A bit overweight and can’t be carried around for too long
  • This Air compressor is quite pricey

7. DEWALT FLEXVOLT  Air Compressor

[amazon fields=”B0746SBGXS” value=”thumb” image_size=”large” image_align=”center” image_alt=”DEWALT FLEXVOLT  Air Compressor”]

With Dewalt Flexvolt 60V, you wouldn’t need electric cords nor gasoline. This framing crew air compressor can go on long job runs without power restrictions. It has a pneumatic finish nailer and a huge stapler; the stapler shots up to 1200 per charge up.

This Air compressor is cordless making its transportation from one point to another easy and less bulky. The Air compressor has a lightweight body of 21.5lbs and a noise level of 79dB.

The Air compressor is perfect for both woodwork and electrical jobs. Dewalt Flexvolt 60V also features a OneTurn regulator, which helps in swift and price pressure adjustments. You will hardly face fight dial struggles with this Air compressor.

This hand-carry Air compressor is also perfect for upholstery, and this is because of its oil-free Dual pump arrangement. Dewalt Flexvolt 60V also has a standard coupler that fits perfectly for ¼” air hoses.


  • Dewalt Flexvolt 60V maintains a high speed during operation
  • It’s portable and compact
  • Dewalt Flexvolt 60V has a large, well-designed 2.5-gallon tank
  • Operates effectively at 135PSI
  • This Air compressor is very easy to handle
  • Dewalt Flexvolt 60V is not pricey, and it’s easy to maintain


  • It’s designed as a one-user Air compressor, and this affects its versatility
  • It can’t handle heavy-duty tasks effectively

8. Senco 1/2- Horsepower Portable Air Compressor

[amazon fields=”B0000AQK78″ value=”thumb” image_size=”large” image_align=”center” image_alt=”Senco 1/2- Horsepower Portable Air Compressor”]

This Air compressor is designed professionally with a contractor’s mindset. It’s compact and sturdy, having a 27 second recovery time. The Air compressor weighs only about 21lbs, and its dimension measures 14x13x10.

With Senco PC1010 ½, easy portability is assured at several job sites. Some gauges are present on the control panel; these gauges are easy to read and utilize. The control panel is designed strictly for apt interpretation of instructions.

The PC1010N features an operational noise level of 68dBA. It has a coupler ¼” that’s universally designed. It has a well-constructed induction motor and oil-free dual pump system; the arrangement of these two components gives the framing crew air compressor its durability and top-notch efficacy abilities.

Besides, the induction motor also has a protective breaker on the pump system, and this arrangement causes a high Amperage consumption.

However, the protection covers both the main operator and the induction motor itself. This Air compressor is one of the few compressors with a safety relief valve.


  • The PC1010N is firm and durable
  • This Air compressor doesn’t produce much sound with its operational noise level of 68dBA
  • Elevates the performance of appliances linked to it
  • The PC1010N is not pricey and affordable for everyone
  • The power unit and inductor motor draw only 4Amps, so it’s void of overload threats
  • It’s portable and handy; transportation isn’t a problem associated with the PC1010N


  • Not suitable for all kinds of operations, industrial-level operations most especially
  • It overheats sometimes, and this could be dangerous at times

9. Twin-Stack 2 HP Portable Framing Crew Air Compressor

[amazon fields=”B0035HYJN4″ value=”thumb” image_size=”large” image_align=”center” image_alt=”Twin-Stack 2 HP Portable Framing Crew Air Compressor”]

The Twin stack air compressor has a pump system that is well lubricated with oil. The air compressor is fabricated to provide its users with efficiency, portability, and durability attributes.

This framing crew air compressor is perfectly constructed; from the interior design and roof finishes, the twin-stack can handle compression jobs. It also comes with a pair of ¼inch couplers, and a regulator mounted on the front panel. The twin-stack also has a pressure gauge that handles the weight of all 4-gallon tanks.

Although this compressor might not have the best look, it is one of the best budget air compressors under $500 on the market. It’s less difficult to bring around because of its portal size and its superb compactness.

Twin-stack is a bit noisy with an operational noise level of 79dBA. Its durability property is due to the cast iron used in its manufacture.


  • DIYers will find this Air compressor interesting because of its level of portability
  • The front panel comprises basic operations making it user-friendly
  • Maximum efficiency is attained with the twin-stack as one can run multiple tools at a time
  • Its durability level is impressive
  • It’s not pricey and affordable by all
  • Its performance rate is about four times more than that of a petroleum-based lubricant


  • It generates lots of noise while in operation
  • The twin-stack is quite difficult to maintain

10. Campbell Hausfeld 8 Gallon Air Compressor for Framing Crew

[amazon fields=”B01IE0UT9Y” value=”thumb” image_size=”large” image_align=”center” image_alt=”Campbell Hausfeld 8 Gallon Air Compressor for Framing Crew”]

This Air compressor is one of the most discreet compressors available in the market. It has an operational noise level of 68dBA, emitting a low sound that can barely be heard.

This Air compressor can function anywhere, especially in industrial areas where noise can’t be avoided.

The pump system is easy to maintain, and it’s oil-free; the way the Pump System is designed makes this compressor unique and lasts much longer than other Air compressors.

This Air compressor for framing crew is versatile and can carry several types of operations. The pump could be used to fill up deflated tires, fixing sporting events equipment, plasma cutting, and even correct malfunctions in pool toys.

This air compressor could also be used for trimming processes and cleaning. It also has a protective one-piece shroud that prevents its users from having close contact with the Air compressor’s moving parts. Lastly, it carries out operation at 120-volt. This is a standard household voltage measurement.


  • Perfect for work in industrial areas due to its noise cancellation property
  • It’s 1 HP operating power which is efficient for brushing, stapling, and carrying out several operations
  • The Dual-piston pump system is oil-free but has synthetic lubricants
  • It’s quite easy to maintain
  • Its durability feature is outstanding
  • Even with its 8-gallon tank setup, it’s still handy and easy to transport


  • This Air compressor is not the best for commercial use
  • It runs at a high voltage of 120 volts, which makes it pricey

Things to Consider Before Buying

Before buying an air compressor for a framing crew, there are certain factors that should be considered.

The Tank’s Volume

the volume of the tank will determine how long you will be using the air compressor. So, if you will be using the nail gun for a long while, you should consider a proper air compressor with a bigger tank.

Basically, an air compressor for framing houses tanks from 1 to 8 gallons, and surely, there are compressors with a larger volume. However, if portability is another factor to be considered, then a 2 to 6 gallons tank should handle the nail gun.


CFM(Cubic Feet per Minute) is a very important factor to consider. If an air compressor has 10 CFM, it means that a particular volume of air it will be releasing every minute will go as far as ten cubic feet.

We advise that you go for a good air compressor with a CFM a little bit more than the recommended CFM for framing.

The reason for this is for a more efficient job. So, to find CFM that suits your work, simply multiply the recommended CFM by 1.5. The resulting factor is the CFM that will make your tool work better.

With that being said, an air compressor of 2 CFM will do the work perfectly for a framing nailer.


PSI is referring to pressure. PSI is the air’s pressure per square inch, often used as short for Pounds per Square Inch. The air compressors for framing already have you covered for pressure as most brands offer enough of it.

However, it is of bigger and better advantage to get an air compressor of larger PSI.

The higher the pressure, the higher the volume of air in the tank. Look at it this way, if you have an air compressor housing a tank of 1 gallon but has a PSI of 150, the volume of air it will accommodate in its tank will be the same as a tank of 1.5 gallons.


The horsepower or HP of the air compressor is the determinant for the quantity of work it can complete in a particular amount of time. It is the motor’s power. In most cases, the volume of the tank, the CFI, and the PSI compliment the horsepower of the air compressor.

If the factors mentioned earlier are adequate, the HP of the tank will match the other requirements.

Noise production

The best framing air compressor is that which does the most efficient work but produces minimal noise. Most of these tools are very noisy, which can be very frustrating, so why not opt-in for one with lesser noise.


You don’t want something so bogus to boost productivity. When the air compressor is somewhat bigger, it might become difficult to move about, and also this will surely reflect on the quantity of work done.

Thermal protection

An air compressor without a cooling system is prone to overheat, and when it overheats, it automatically goes off. This might not matter when using the air compressor for few minutes.

If you are using it for an extended time, you should consider an air compressor with a cooling system.

Why would you Buy an Air Compressor for Framing

Aside from the fact that they are used for framing nailers, there is a long list of other reasons why you should get an air compressor for framing. For one, it is a very power-efficient and pneumatic tool for framing works.

Here are other reasons you should buy an air compressor for framing.

They are safe

Unlike other conventional tools, the air compressor reduces the risk of shocking or starting a fire.

Consistent power

When using an air compressor for framing, be rest assured you will get the work done swiftly. They provide not just adequate power but consistent power too to get your work done.

Longer lasting

Again, against the conventional tools, the air compressor is more durable and lasts. This means, over time, it is a good investment plan, and you get to keep your money in your purse.

Environmentally friendly

Though some authors disagree because of the noise some produce. Buying one of the durable air compressors for framing works proves that they are environmentally friendly as they produce minimal noise.

What Size of Air Compressor Do You Need for Framing Nailer?

When using an air compressor for a framing nailer, a continuous supply of air is not necessary. All you need is a bust enough to drive nails in. Generally, you will need an air compressor with a minimum of 2 CFM and 2 gallons to 6 tank volume.

However, this depends on the kind of nailer you are using. To help you select the air compressor for framing nailers, we have prepared a list of the types of nailers and their recommended sizes.

  • Pin nailer – 2.0 CFM & 1 gallon.
  • Brad nailer – 2.0 CFM & 2 gallons.
  • Finish nailer – 2.0 CFM & 2 to 3 gallons.
  • Roofing nailer – 4.0 CFM & 6 gallons.
  • Framing nail guns – 4.0 CFM & 4 to 6 gallons.
  • 2-4 guns at once – over 6 CFM & 6 gallons.
  • Sheating stapler – 4.0 CFM & 6 gallons.

What PSI Do You Need for Framing Nailer?

The PSI and CFM of an air compressor should be considered together. The value of the PSI and CFM must be beneficial to your nailer. And how do you go about that? That said, the PSI should be more.

All framing nailers except for the central pneumatic 95275 having a PSI of 120, or thereabout is the only compressor not suitable for nailing based on its pressure.

Framing nailers of all tools demand a very high and significant amount of pressure. This is based on the fact that nails used are typically between 3 inches to 3½ inches which is the recommended size of nails to be used in the construction of rough framing.

Finally, the PSI for your framing nailer should fall between 130 to 100 PSI for the most effective work.

However, based on the types of framing nailers, to determine the suitable PSI, a pro tip to go by is to multiply the actual PSI for your framing nailer by 1.25. The derived PSI will work effectively and efficiently.

Advantages of Investing in an Air Compressor for Framing

There are lots of options to choose from for air compressors for framing, and that brings about the question of having to pay more for a particular one when there are other types at lower prices. In most cases, the price varies directly to quality.

Here are some advantages of investing in a quality air compressor for framing.

The Right Power Output

You don’t want an air compressor that gets empty in a moment and takes an eternity to refill. High-quality air compressors assure the best power output, enabling the crew to work at maximum potential.

CFM Synchronization

Imagine a case where you want to sync your air compressor to a required CFM, but the air compressor isn’t capable. Top-class air compressors have just the right quantity of CFM, making it easy and fast for the crew to operate.


Who doesn’t desire an air compressor that can be easily carried? Despite all other functionalities, air compressors for framing crew are also mobile and portable.

Noise Reduction

Air compressors are built to produce the barest minimum of noise. Well, we all know the benefit of this.


Last but not least, durability. High-quality air compressors with regular and the right amount of maintenance can tend to last a lifetime. Even at that, they require less maintenance compared to regular ones that are way cheaper.

Types of Air Compressors for Framing

Air compressors are of various types with individual unique features and characteristics to pick from. The types of air compressors for framing are:

The Twin-Stack Compressor

The twin stack compressor comes with a double tank, meaning you have more space to store air. There are still somewhat portable though there are bigger ones that weigh as much as 36kg.

The Portable Single-Stage Compressor

Firstly, it’s portable. Then, it has a single tank. This kind of air compressor is the most popular compressor used for framing.

The portable single-stage compressor comes with a better engine and compressor pump, attracting a higher price tag than other portable ones.

The Wheelbarrow Compressor

The wheelbarrow compressor, as you can guess, is mobile. They are most effective in job sites. Equipped with strong engines and larger tanks and constructed with durable materials, the wheelbarrow compressor is immune to tough conditions.

The wheelbarrow compressor has a pair of wheels and handles that allows you to pull it through any terrain. The material used in constructing the wheelbarrow compressor is heavy; regardless, it is portable and mobile, which is far much an important factor.

It is possible for a wheelbarrow compressor to weigh up to 136kg.

The Truck-mount Compressor

These are the biggest air compressors, not just that, but they are also the most powerful and most portable compressor you can come across. Though they are very heavy like the name implies, they are truck-mounted, so the weight doesn’t matter here.

With the weight and size of this air compressor comes a larger tank, more reliable pumps, and higher CFM capability. Among other air compressors for framing, this particular type possesses a hindrance because the framing crew can only use it in sites that can be driven to.

Frequently Asked Question (FAQs)

1. What Brand and Weight Air Compressor Oil Should you Use For Framing Compressor?

There are various brands of oil you could use for your framing compressor. It would help if you compared them to see the one that best suits your needs and meets expectations.

Experts have weighed all these kinds of oil, especially for air compressors for framing tools, and have concluded that SAE 20 and SAE 30 are the most suitable kind to be used.

2. What Makes an Air Compressor Great for a Framing Crew?

The CFM requirement of the nailer is essential in determining the air compressor that is best for the framing crew. Firstly, you should discover how many CFM your nailer requires, usually within the range of two to six.

The next step in determining the right framing air compressor is discovering how many framing tools will be used and if they will run simultaneously.

If you will be using your air compressor for multiple framing tools at the same time, a stronger air compressor is recommended.

3. How Many CFM Do You Need for A Framing Nailer?

The CFM of an air compressor is the output of the compressor, the volume of air it produces. Usually, most pneumatic tools you will come across require about 5 CFM, if not more.

However, they vary in a very wide range. Your framing nailer requires 2.2 CFM.

This is just an average figure. By the way, the CFM required for a framing nailer may differ from another framing nailer based on their types.

4. Do Framing Air Compressors Need Pressure Gauges?

The pressure gauge of an air compressor is similar to the steering of a vehicle. It is not the air compressor’s engine, but the air compressor won’t work without it.

The function of the pressure gauge is to watch and regulate the pressure of the air compressor. The air compressor cannot be used for any project in the absence of the pressure gauge of an air compressor,

5. Can You Run a Framing Air Compressor on Battery Power?

Yes, it is possible. There are lots of framing air compressors that work on battery power. The battery-powered framing air compressors are smaller in size, digital, and are only suitable for minimal impact works for a short duration.

A DC battery isn’t incompatible with framing air compressors; however, if you convert your DC battery to AC, it’s possible it works.

6. Should You Drain my Framing Air Compressor after Every Use?

If you don’t drain your framing air compressor after each use, the occurrence of a pool in the tank is very likely. If this eventually happens, the tank rusts and gets weak after that.

So, yes, it is necessary you drain your framing air compressor after every use.

Opening the valve too fast is not advisable. What you should do to drain the tank appropriately is slowly crack the valve till you notice a seepage of water.

This allows water gathered at the base of the tank to leak out.

7. Is Electric or Pneumatic Nail Gun Better?

Well, it depends on what the nail gun is to be used for. If you aren’t using the nail gun for more than house duties, you need something not too powerful, and the electric gun will do it.

If the work is on a larger scale, the electric nail gun can’t be efficient enough. This is where the pneumatic nail gun comes in, as it has the capability and efficiency to handle large-scale tasks.

So, What’s The Best Air Compressor for Framing Crew?

The air compressor for the framing tool is a portable one with a significant tank capacity, with PSI, CFM, and HP to complement each other.

All these properties can be seen in the Bostitch Air Compressor Combo Kit. This is a cordless air compressor that operates without noise. To crown it all, it is lightweight and portable.

When it comes to choosing the best air compressors for the framing crew, you must opt for one that has a greater CFM rating than that of your tool. It means that your tool continues to get sufficient power to run efficiently.

This framing compressor is ideal. In fact, it is the best for a wide range of finishes and other applications. Aside from framing, the compressor can be used for several other purposes as it can produce high pressure.

Arthur Kyser Morn

Hey Guys! It's me Arthur Kyser Morn, aka AKM, the proud founder and author of Tools Auditor. I'm a content marketer, a dad of 2 lovely sons, and a handyman. I love trying out new tools, and together with my team, I've been creating helpful guides since 2017 with tools and DIY tips.

Recent Posts